Description

APC Back-UPS 1200VA/650 Watts, 120V, AVR

voltage input

120 V AC 1 phase
output voltage 120 V AC 1 phase
Rated power in W 650W
rated power in VA 1200VA
Input Connection Type NEMA 5-15P
Output connection type 6 NEMA 5-15R
cable length 1.52m
number of wires 1
Battery Type Sealed lead acid batter

Batteries and autonomy

• Pre-installed batteries 0
  Free slots for batteries 0
  Typical recharge time 8 a.m.
  battery voltage 12V
  battery capacity 9.0 Ah
  battery life 2…3yr
  Replacement battery

APCRBC175

extendable duration 0

General

Number of power module free slots 0
Number of power module filled slots 0
Redundant No
UPS size WS

Entrance

Assigned frequency of employment 50/60 Hz +/- 5 Hz ((*)) auto-sensing ((*))
spreader bars 89…145V 120V AC
input protection type Circuit breaker
cos phi 0.54

Exit

Maximum configurable power (watts) 650W
Output frequency (synchronized to main power grid) 50/60 Hz +/- 1 Hz synchronized to the main electrical network
topology Interactive line
waveform type Stepped approximation of a sine wave
the screwdriver slot 98% – cable type: full charge)
Full load runtime 00:01:00 650W
graph display 1
Half load runtime 00:06:00 325W
Maximum configurable power in VA 1200VA
transfer time Typical value 6 ms : Maximum value 10 ms

Accordance

product certifications NOM

Environmental
Ambient operating temperature 0…40°C
RH 0…95% non-condensing
maximum operating altitude 0…3000m
Ambient storage temperature -15…40°C
Storage Relative Humidity 0…95% non-condensing
storage altitude 0…3000m
acoustic level 40 dBA
IP degree of protection IP20

Communications and management
control Panel On-line led indicators: battery on
audible alarm On battery alarm: Distinctive low battery charge alarm

Protection against surges and filtration
Overload Energy Rating (Joules) 350

packaging units
Number of units in the package 1 1
Weight 8.7kg
Height 11.5″
Width 23.5cm
Length 49.5cm

APC Back-UPS 1200VA/650 Watts, 120V, AVR